Kit Includes TL-100 Charger and 2 x Ultrafire 18650 PCB 2400mAh Protected Lithium Ion Batteries
This kit is made primarily for those looking to power a flashlight that uses 1-2 18650 batteries. Compatible with popular lights like the Olight M20, LumaPower Encore, M1, MRV, MVP and other.
Charger come with 2 18650 Batteries- You pick whether you want 2400mah, 2600mah, or 3000mah batteries. And If you need more then 2 you can pick up extra batteries at the accessories tab.
(Click the tabs for more details)
Please Note: 2600mAh and 3000mAh batteries may not fit all models of Fenix flashlights.
Features and Benefits:
- Universal Li-Ion battery charger for 18650, 16340 (CR123A sized), 17670 3.7V Li-Ion cells.
- Can be used anywhere worldwide with 100-240 V input. Good for oversea travel.
- Smart charger automatic cut-off.
Product Specifications:
- Power Input: AC110~240V, 50/60Hz
- Power Output: DC5.5V-350mA
- Charging time:
- 800mAh: 3 hours
- 2000mAh: 8.5 hours
- 2200mAh: 9.5 hours
- Dimension: 3 13/16" x 2 3/8" x 1 5/16"
- Weight: 3.9oz charger and adaptor together
Instructions for Use:
- Insert cell(s) into the charger before connecting charger to power.
- Plug in Charger.
- If batteries are removed during charge, unplug charger and re-insert batteries.
- LED light for charging status indication:
- When charger is plugged in and received power the LED strobes Red/Green.
- LED is Red when charging, Green when charging is completed.
- If LED is off or flashing at an extremely fast rate, the cell/s are not suitable for charging with unit and should be removed immediately. If cells are installed with polarity reversed, LED will also be off - simply reverse polarity of cell.
NOTE: The power output of this charger is incorrect for the protected 3V 750 & 900mah RCR123A cells that we carry. We specifically do not recommend using this charger for those cells. Only use this charger with 3.6 & 3.7V cells. Battery Specifications (for 2400mAh 18650's):
- Capacity: Nominal: 2400mAh
- Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V. UNIQUE INTERNAL PCB!
- Dimensions:
Diameter 18+/-0.2 mm
Height 66.5+/- 0.2mm
- Weight (Typical) Approx. 46 g yes
- Nominal Voltage: Average 3.7V
- Cut-off Voltage: 2.5V
- Internal Impedance: less or equal to 180 milliohm (with PTC)
- Cycle Performance: 90% of initial capacity at 400 cycles
- Cycle life: > 500 cycles
- Charge: Current = 0.5C mA Voltage = 4.2 V End Current = 0.01 mA
- Discharge: Current = 0.5C mA End Voltage = 3.0V
Battery Specifications (for 2600mAh 18650's):
- Capacity: Nominal&: 2600 mAh, Minimum: 2400 mAh
- Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V. UNIQUE INTERNAL PCB!
- Dimensions:
- Diameter 18.3+/-0.5 mm
- Height 67.5+/- 0.5mm
- Weight (Typical) Approx. 46 g yes
- Voltage: 3.7V (also called 3.6V and 4.2V)
- Cut-off Voltage: 2.5V
- Internal Impedance: less or equal to 180 milliohm (with PTC)
- Cycle Performance: 90% of initial capacity at 400 cycles
- Cycle life: > 500 cycles
- Charge: Current = 0.5C Voltage = 4.2 V End Current = 0.01 mA
- Discharge: Current = 0.5C End Voltage = 3.0V
Battery Specifications (for 3000mAh 18650's):
- Capacity: Nominal&: 3000mAh, Minimum: 2450 mAh
- Internal PCB protection prevents under-voltage at 2.5V and over-voltage at 4.25V. UNIQUE INTERNAL PCB!
- Dimensions:
- Diameter: 18.6+/-0.2 mm *
- Height: 66.5+/- 0.2mm
- Weight (Typical) Approx. 46 g
- Nominal Voltage: Average 3.7V
- Cut-off Voltage: 2.5V
- Internal Impedance: less or equal to 180 milli-ohm (with PTC)
- Cycle Performance: 90% of initial capacity at 400 cycles
- Cycle life: > 500 cycles
- Charge: Current = 0.5C (~1500mA) Voltage = 4.2 V End Current = 0.01 mA
- Discharge: Current = 0.5C (~1500mA) End Voltage = 3.0V
* Note: These higher capacity cells have a larger diameter than standard 18650's and may not fit all flashlights. Please verify dimension of flashlight or device. Not Compatible with Fenix T-Series flashlights.
WARNING:
Use caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. We are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We only recommend using Lithium Ion rechargeable batteries with a control circuit (protection PCB) to assure safe charge, discharge, etc, use of lithium ion batteries with a protection circuit is potentially hazardous
-->
|  | Regular price: $16.95 Sale price: $7.95, (4) $31.00, (20) $145.00 |
|  | Regular price: $19.95 Sale price: $7.95, (4) $31.00, (20) $150.00 |
|  | Regular price: $19.95 Sale price: $10.95, (4) $42.00, (20) $199.00 |
|  | Regular price: $9.95 Sale price: $4.50 |
|  | Regular price: $8.95 Sale price: $6.50, (10) $55.00, (100) $450.00 |
|  | Regular price: $24.95 Sale price: $16.95, (20) $279.00, (100) $1,195.00 |