Features and Specifications
- Consist of 20 pcs High quality D size NiMH 10000 mAh Cells packed in 10x2 configuration. ( two 12V 10A battery modules connected in series)
- Special Heavy Duty Shrink Tubing -- Polyolefin, provide extra protection for the battery pack.
- Charging terminal and discharging terminals separated
- Voltage: 24V ( working ) ( 29V at peak)
- Capacity 10000mAh ( 240 wh)
- Charging current: 1.5 A standard 5.0 A max.
- Discharging rate: 10A ( standard ) 30A ( Max.)
- Protection 65o Thermostat in charging terminal to protect battery overcharged
- Prewired Two Charging terminals
- 18AWD wire with mini Tamiya female
- Two Discharging terminals: 14 AWG wire with standard Tamiya Female
- One 2 to 1 connector adapter included to make two 12V module connecting in parallel
- Dimension: 13.25"L x 2.75"W x 2.5"H
- Weight: 11 lbs
Strongly suggest to charge the pack by either of the chargers below with temperature sensor for avoiding the battery damage caused by overcharging.
Must charge each module separately.
Designed for Electric Scooter and Any DC 24V devices. Ideal for replacing Lead acid batteries of electric bikes and scooters. Has less weight, more power and Environmental friendly. .Warning:
- Please don't over discharge the NiMH battery pack below 1.0V/cell.
- Please don't overcharge the battery beyond 30A, which may damage the battery permanently.
- Charge battery from the charging terminal only.
- Charge battery pack after use for a longer storage life.