LumaPower MVP TurboForce P7 LED Searchlight - Flashlight ~700 lumens!

LumaPower MVP TurboForce P7 LED Flashlight

The LumaPower MVP TurboForce sets the new standard in portable handheld lighting. With levels of output and throw heretofore only available in very expensive High Intensity Discharge (HID) lights the MVP TurboForce is a true powerhouse. Constructed of the highest grade of T7 aluminum covered in MilSpec Type III Black Hard Anodizing the TurboForce is built to last. The advanced heatsink design ensures stable, non-dimming output over extended runtimes. The MVP TurboForce offers 3 levels of output and a DEVASTATING tactical strobe mode. An innovative approach to power and output switching is a signature of the MVP's design; the tailcap switch controls on/off and offers a momentary feature; on the side is the new SideKick switch which allows the use to control output modes and levels. For users this means being able to 'preset' a mode or level in advance of activating the light; so a camper/hiker can have the light pre-set to low and a tactical user could have their light pre-set to high or tactical strobe.

Uses a state of the art SSC P7 LED. Up to 700 lumens of total output!

3 Brightness levels: Hi: ~700L, Medium:~250L, Low: ~50L, Strobe: ~650L

Wide input voltage from 6.5-10V allows users to use a variety of battery types/combinations:2X Li-Ion (16340(RCR123A, 17650, 17670 or 18650 (18650 recommended for longest runtime and highest output)(4xCR123A cab be used on low and medium output modes for emergencies and backup and for up to 4 minutes on high)

Over discharge protection (For 2x Li-Ion batteries) at 4.8V

Runtime: 90 minutes on High, 2500 minutes on Low (using 2x18650 2600mAH)

State of the art, super efficient, current controlled DC-DC power circuit

Anti-Roll Body design

Removable Lanyard Ring

AR coated lense for maximum light transmission and reduced reflection

Dimensions: Length:264mm, Bezel Diameter:71mm, Body Diameter:28mm, Tail cap Diameter:32mm, Reflector Diameter : 60mm, Weight:463g(without batteries)

FAQ:What is the difference between the MVP and the MVP TurboForce P7? The MVP uses 3 single LED's, each ensconced it in't own reflector; the TurboForce model uses a single emitter with LED 'die' on it. Overall output is basically the same however the MVP can 'throw' it's light slightly further while the TurboForce version offers signficantly more 'spill' light outside of the hotspot area. The light from the MVP is a bit warmer colored than that of the TurboForce. The MVP is slightly shorter and has a smaller bezel or head.