Tiablo A8 LED flashlight Special Edition with CREE Q5 WC Emitter 250+ lumens

PLEASE NOTE: This item has been discontinued.

Tiablo Flashlights are designed and manufactured with strict quality control permitting users to have an exceptionally bright, long lasting, reliable and easy to use flashlight.

Specifications:

State of the art Cree 7090 XR-E Q5 WC LED

Step up and down constant current driver, with high efficiency dual mode DC-DC regulator (PWM / PFM) and circuit to protect Li-ion battery from over-discharging.

Working voltage is 2.3V to 6V, under or over the circuit will cut off to protect battery and flashlight.

Two stage output:(runtimes with 18650 lithium ion cell)

• High output: 1A at 250 Lumens for 2 hours runtime.
• Low output: 400mA at 100 Lumens for 8 hours runtime.

42 mm diameter x 36 mm deep reflector provides greater efficient illumination over longer distances than the standard with similar power.

Support battery sizes Two 3.0V CR123A batteries or one 18650 Li-ion battery. OPTIMIZED for use with 1 x 18650.

Type-III hard anodize high quality aerospace grade T7075 aluminium construction.

Water proof: waterproof to 5m/15ft.

Toughened ultra clear glass lens with AR coating

Reverse Tactical Tailcap switch: High/Low/Off button.

Weight: 150 g / less than 5.3 ounces excluding battery.

Length: 155mm Head diameter: 45mm Housing Diameter: 25.4mm

Optional single stage forward tactical click switch with momentary feature(not included).

Operation: Unscrew the tail cap, insert the batteries into the housing with the anode, positive, towards the head/LED, and screw on the tail cap. Your Tiablo Flashlight is now ready for use. Press the tail cap to for low output, press second time for high output, and press again to turn it off.

Remarks and FAQ: 1. When using two new CR123A batteries, use the flashlight at low output stage for three minutes before high output stage. 2. Install the battery anode, positive, towards head or the LED. 3. Reflector must remain untouched or performance will be diminished. 4. Always use Two 3.0V CR123A batteries or one 18650 Li-ion battery. 5. Storage, remove the battery or batteries and keep the housing dry. 6. Modification or disassembly of the circuit will void the warranty. 7. The Tiablo CANNOT use 2 x RCR123A either 3V or 3.6V.