Micro-Controlled Li-Po/Li-ion Balance Charger w/ LCD Display

Simply the Best Charger at the Best Price! Supports most popular power packs, including ThunderPower.

Product Key Features:

• Intelligent and Smart Charger with Balancer that fully support wany 1-4 cell Li-Polymer and Li-ion battery packs
• Big LCD display. real-time displays voltage and charging processing clearly and separately. (Pictures 1-2)
• 4 separated parallel charging circuits ensure your battery 100% fully charged. Higher efficiency.
• Adjustable charging current from 0.5A to 4.0A which can be set by the buttons on the board. These are the two round black buttons on the left (Picture 2)
• Controlled by 4 separated internal micro computers. Charge 1S-4S battery separately, unlike other serial charging + balancer setups on the market. More efficient.
• Complete circuit protection for battery reverse polarity: protect the charger and battery even when connect the battery or the power supply reversibly.
• Low voltage protection. charger won't charge any cell if voltage is lower than 2.7v.
• Automatically charging stop when it's charging is done. A buzzer will call.
• Working rating: -20 ~ 60 C
• Charge 2S, 3S, 4S Li-Poly battery packs with Align/JST balance Connector. If your battery is Thunder Power, Kokam, or Poliquest, you will need an extra adapter.

Charge mode of the balanced parallel connection:

• Charge in parallel connection for one single cell or four single cells at one time
• Charge in parallel connection for a pile of two series-wound lithium cells or two piles of two series-wound lithium cells at one time
• Charge in parallel connection for a pile of three series-wound lithium cells or one single lithium cell at one time
• Charge in parallel connection for a pile of four series-wound lithium cells
• Input voltage: DC 11V~15V. The working electric current is less than 6A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit.

Warning:

• Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode if mishandled.
• Protective Circuit Board is required when making packs
• Make sure user has enough knowledge on Li-Ion rechargeable batteries in charging, discharging and assembly before use. Put the batteries in fire-proof container in charging
• Never leave batteries unattended when charging
• Do not put batteries on wood surface or carpet when charging We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries in charging We are not responsible for damage caused by other Li-ion batteries not supplied from us
• Do not make any changes to the charger, charger accessories or connectors, as this might cause electrical shortage, fire or over-heating during charging. We are not liable for the product is any changes are amde to the chargerm accessories or connectors.