- Charges any 3.7-14.8V Li-Ion/LiPO battery pack with capacity > 1000mAh.
- Charges 1-4 cell Li-Ion battery packs or Li-Polymer battery packs with capacity more than 1000mAh.
- Smart charger capabilities will auto-switch output.
- The charger will cut off automatically when battery is fully charged.
- 100V-240V AC input for worldwide power support.
- MCU controls the whole charging process and guarantees the battery pack achieves full charge and avoids battery pack over-charge
- Constant charging current for faster charging
- Stabilized output - low ripple
- Safety protection:
- Over Voltage protection
- Short Circuit protection
- Polarity error protection
- The charger turn trickle-off charging mode if battery is full (1/10C), and indicate by LED:
- Red LED On: Charging
- Green LED On: Charged
Notes and Safety Warnings:
- Input: AC 100-240V 50-60Hz 1.0A
- Output: DC 4.2-16.8V Auto-detection
- Charging current: 1A
- Compatible Battery Packs: 1-4S
- Capacity That Can Be Charged: 1000mAh+
- Part Number: TLP-4000
Data SheetMore Information:
- The TLP-4000 is only for charging 3.7-14.8V Li-Ion/LIPO rechargeable battery packs
- Do not expose the product to rain, moisture, or excessive humidity to limit the risk of electric shock
- The charger is normally slightly hot during use
- Keep the product out of the reach of children.
- Do not take apart or modify the unit
The Tenergy lithium ion smart charger TLP-4000 can charge a variety of Li-ion or LiPO battery packs. The smart charger features an auto-switch output and the ability to completely cut off power when the battery pack is fully charged. The 100V-240V AC input allows for worldwide power support. A MCU controls the charging process and guarantees that the battery pack is fully charged without becoming over charged. Several safety protections ensure the battery is not damaged during the charging process. A convenient LED indicator light visually displays the status of the smart charger 18650.