Here at Battery Junction we take pride in our selection of batteries and chargers. If you buy from us, you know you're getting
a quality product. Shopping for battery chargers can be particularly difficult. You want a charger that isn't going to overcharge
your batteries, one that won't decrease the lifespan of your cells, and most of all one that is safe
. That's why it is our
pleasure to announce the XTAR VP1 dual channel charger.
With the VP1, safety is paramount
The VP1 can charge up to two batteries simultaneously and charges ten different types of lithium-ion batteries including the most
common 14500 and 18650s. The best part, you won't have to load different spacers to charge different types of batteries, the spring
loaded contact plates will adjust to the right size automatically. Make sure to check the features and specifications section for more details.
You can choose between three unique charging modes - 0.25A, 0.5A, 1.0A. Reverse polarity protection circuit board comes standard so
if you accidentally put your batteries in backwards, there will be no harm done.
The LCD display is one of the key features to the VP1. With it you can clearly and easily read battery charging status, voltage levels and
charging mode like never before. The VP1 is particularly good at restoring life to previously drained batteries. The LCD display will flash an
empty battery symbol to indicate that it is switching to Soft Start function
to trickle charge the dead battery. The VP1 also
comes with guaranteed over charge protection
which will automatically stop current into the battery as soon as it's reached capacity. Combine all
of this with top notch heat dissipation and fireproof ABS plastic casing and what you're left with is one of the safest, easy to use, and
reliable battery charger on the market
. If you haven't tried a XTAR charger, you gotta give it a shot.Features and Specifications
Charges the Following Lithium-Ion Batteries:
- Choose between three unique charging modes: 0.25A, 0.5A, 1.0A
- Two independent charging channels
- Reverse Polarity Protection Circuit Board comes standard
- LED Voltage and Battery Level Display
- Top notch Heat Dissipation - maximum safety
Protected with fireproof ABS plastic casing
- Soft Start function prevents large current surges
- Overcharge Protection automatically stops charging when the battery is at maximum capacity
- Spring loaded contact allows for easy charging of many different types of battery.
- Input AC 12V DC 1000mA:
- 0.25A CC: 250mAh±30mAh
- 0.5A CC :500mAh±50mAh
- 1.0A CC :1000mAh±80mAh
- Cut-Off Voltage: 4.2V±0.05V
- Length: 118 mm / 4.65"
- Width: 62 mm / 2.44"
- Height: 34 mm / 1.34"
- Weight: 95g / 0.21 lb