Nitecore EC11 EDC Flashlight Combo With Battery and Charger

Tiny But Tactical

Modest in its size, the Nitecore EC11 LED Flashlight delivers the same tactical capabilities as its larger competitors while maintaining optimal portability. Less than 3 inches in length and powered by a single IMR 18350 battery, the EC11 features a state-of-the-art CREE XM-L2 U2 LED that can produce 900 Lumens of brilliant white light that can reach up to 190 meters away, as well as four dimmer constant brightness outputs to fit the needs of a variety of situations. The light also features several tactical outputs including a Strobe Mode, S.O.S. Mode, and Beacon Mode to cover a number of tactical lighting needs. The EC11 even comes equipped with a secondary Red LED that can not only be used as a steady or flashing lights, but also acts as a voltage indicator and a beacon while in Standby Mode. While using an IMR 18350 battery is recommended for brighter output, the EC11 is also able to operate using a CR123A for dimmer outputs but longer runtimes.

Everything You'll Need

As amazing as the EC11 is, it still requires a power source to function. Bundled with this impressive light are the Nitecore IMR 18350 Li-Ion Battery and the Nitecore Intellicharge i2 2-Channel Smart Charger, both incredibly popular and effective accessories. The IMR 18350 battery holds a substantial charge of 700 mAh and delivers the high current needed to produce the EC11's intense outputs. The i2 Smart Charger uses its pair of charging bays to quickly and safely recharge a wide range of batteries, including the 18350, while marking their status on the LED displays above. With this effective duo of accessories, your EC11 will continue to perform to its full capabilities.

Bundle Includes:

• (1) Nitecore EC11 LED Flashlight
• (1) Nitecore IMR 18350 Li-ion Battery
• (1) Nitecore Intellicharge i2 2-Channel Smart Charger

Flashlight Features:

• Hard-anodized aluminum body is lightweight and durable
• Toughened ultra-clear mineral glass lens complete with anti-reflective coating
• Secondary Red LED generates steady or flashing light
  • When batteries are installed, red light will flash to indicate battery voltage
  • When in Standby Mode, red light will flash every 3 seconds to park its location
• Features three special tactical outputs:
  • Strobe Mode for daze a target
  • S.O.S. Mode to signal for aid
  • Beacon Mode for marking your location
• Dual body switch makes operating light easy and straightforward
  • Power Switch activates and deactivates light
  • Mode Switch cycles through all outputs
• Constant Current Circuit helps maintain consistent and steady light output
• Built-in reverse polarity protection
• Tail Stand Capable for candle lighting
• Included Accessories:
  • 1 x Nylon Holster
  • 1 x (R)CR123A Battery Magazine
  • 1 x Anti-rolling Pocket Clip
  • 1 x Lanyard
  • 1 x Spare O-Ring

Flashlight Specifications:

• LEDs: CREE XM-L2 (U2), Secondary Red LED
• Power Source: 1 x IMR 18350 (included) OR 1 x CR123A OR 1 x RCR123A (16340)
• IPX Rating: IPX-8 (Waterproof and submersible up to 2 meters)
• Impact Resistance: 1.5 meters
• Brightness Outputs (Using IMR 18350):
  • Turbo - 900 Lumens - 30 Minutes
  • High - 300 Lumens - 45 Minutes
  • Medium - 160 Lumens - 1 Hours 30 Min.
  • Low - 70 Lumens - 2 Hours 30 Min.
  • Ultralow - 1 Lumen - 12 Hours
• Brightness Outputs (Using CR123A):
  • Turbo - 430 Lumens - 45 Minutes
  • High - 230 Lumens - 1 Hour 30 Min.
  • Medium - 100 Lumens - 3 Hours 15 Min.
  • Low - 40 Lumens - 8 Hours 30 Min.
  • Ultralow - 20 Hours
• Peak Beam Distance: 190 meters
• Peak Beam Intensity: 9000 cd
• Dimensions:
  • Length - 2.95"
  • Head Diameter - 1"
  • Body Diameter - 1"
• Weight: 1.6 oz.