Power-Sonic 12V 4A 4-Cell LiFe Battery Charger for 12.8V 4Ah - 40Ah LiFePO4 Batteries - US Plug (PSC-124000-LIFE)
- 3 Step charger for the PSC LiFeP04 battery series.
- 4 cell 4.0A charger equipped with current detection.
- Universal standard input voltage of 90-240V AC.
- LED charge control indicator for user convenience.
|Applicable Battery Chemistry||Lithium Iron Phosphate|
|Kind of Charger||3 Step LiFeP04|
|Designed For||4-Cell PSC-LiFe Series Batteries|
|Operating Temperature||-13°F to 104°F (-25°C to 40°C)|
|Storage Temperature||-13°F to 185°F (-25°C to 85°C)|
|Input Terminal||2 Pin IEC 320 Connector|
|Output Terminal||Alligator clips with insulated sleeves|
|IP Rating||IP41 - Protected from tools, small wires and condensation|
|Input Voltage||90-264V AC|
|Leakage Current with Mains Off||<0.7mA at 12.8V|
|Max Output Power||58W|
|Protection||Protected against reversed polarity and short circuit proof|
|Insulation Class||Class II|
|Primary Insulation Voltage||3000V AC|
|Secondary Insulation Voltage||5700V DC|
|Electrical Safety||EN/EIC 60335-2-29, EN/IEC/ANSI 60601-1(3.1 Ed) & EN/IEC 60601-1-11|
|EMC Standards||EN 55014-1&-2, EN/IEC 61000-6-3, EN/IEC 61000-6-1, EN/IEC 60601-1-2|
|Indicator Type||LED Display|
|See charger diagram in downloadable specification sheet|
|Step 1 - Orange||Charge Current: 4.0A±0.2A|
|Step 2a - Orange||Charge Voltage: 14.6V±0.1V|
|Step 2b - Yellow||To yellow when current is <1.6A±0.1A|
|Step 3 - Green||Float charge when current is: 300mA ±25%|
|Step 3 - Green||Float charge voltage: 14.0V±0.1V|
|Power-Sonic PSC 124000 LiFe Charger|
|Alligator Clip Connectors with Insulated Sleeves|
|Length||5.31" / 135mm|
|Width||3.15" / 80mm|
|Height||1.73" / 44mm|
|Weight||13.76oz / 390.08g|
Power-Sonic PSC 124000 LiFeP04 Charger
Safe and Reliable
The Power-Sonic PSC 124000 is a charger designed specifically for the Power-Sonic PSC series of LiFeP04 batteries. This 4 cell charger uses optimized charging technology to safely recharge even the most discharged batteries. Certified to be used with medical applications, the PSC 124000 is guaranteed safe and reliable.
3 Step Charging
The PSC 124000 charger uses a three step charge control with current detection for safe, predictable charging of this line of lithium batteries. The LED indicator provides real-time step progress for monitoring the process easily without use of another device.
- Notable Features
- » 3 Step charger for PSC LiFeP04 series of batteries
- » 4 cell 4.0A charger with current detection
- » Designed for universal standard input voltages of 90-240V AC
- » LED charge control indicator for real time monitoring of each step
- » Includes alligator clips with insulated sleeves
- » Certified for use with medical applications safely
- » Made in Europe with quality materials
Reviews and Q&A