Nitecore Multitask Hybrid MH25GT Flashlight Hunting Kit with Gun Mount, RSW1 Pressure Switch, Filters and Holster - CREE XP-L HI V3 LED - 1000 Lumens - Uses 1 x 18650 (Included) or 2 x CR123A
Nitecore MH25GT All-in-One Hunting Kit
Rechargeable Flashlight Fitted with All of the Necessary Accessories!
The Nitecore MH25GT Hunting Kit includes everything you may need while out on the range or while camping outdoors. This all-in-one package takes the rechargeable LED flashlight to the next level, by pairing it with two filters, a remote pressure switch and a choice of weapon mount, all of which was included with hunters in mind. The red filter, for example, is perfect for use at nighttime so as to not ruin your dark-adapted vision. Maps are also more readable under red light. The green filter, on the other hand, is ideally meant for nighttime hunting as animals are not frightened by the light. The beam also cannot be seen from the side, which makes it easier for you to approach animals without scaring them. This MH25GT hunting kit also includes an RSW1 remote pressure switch, as well as a choice of three different types of weapon mounts. Both accessories enable you with the ability to attach the light to a gun, without losing any functionality. The GM02, for example, is designed for use with Weaver or Picatinny rails, while the GM03 weapon mount is compatible with rifle and shotgun barrels. The third option, the GM04 works with Picatinny rails.
Brilliant Brightness, Convenient Power, Tactical Design
The Nitecore MH25GT rechargeable LED flashlight offers an intense maximum output of 1000 lumens. In addition to this brilliant Turbo mode, the light also offers three additional outputs, ranging in brightness from 300 to 50 lumens. Two additional tactical outputs are also included for emergency situations. The Nitecore MH25GT features an elongated reflector to increase the beam distance to an impressive 452 meters. The rechargeable flashlight runs on one 18650 battery(included) or two CR123As, when in a pinch. Please note that run times differ slightly when using lithium primary batteries; for best results please utilize the included lithium-ion battery, which can easily be charged internally. The Nitecore MH25GT flashlight is equipped with a micro-USB charging cable for effortless powering of the light's battery in-between uses. To operate the light, simply press the tactical tailcap switch. A half press enables the momentary output, while a full press activates either the Turbo or the User-Defined Mode. Alternate between output levels by simply tightening or loosening the light's head. A U-shaped guard on the tailcap is even provided to prevent accidental activation.Features:
- Aerospace-grade aluminum with military-grade hard-anodized finish for durability
- Anti-roll body design prevents movement when placed on a table
- Toughened ultra-clear mineral glass lens comes with anti-reflective coating
- Stainless steel bezel ring prevents damage to internal components
- Ultra-precise reflector allows for optimal beam distance
- 2 tactical outputs:
- Strobe Mode: Used to blind / disorient a target. Can also be used as a signal.
- S.O.S. Mode: Used to signal for help in emergency situations
- Easy-to-use twist design allows for quick changes between Turbo Mode and User-Defined Mode (Either High, Mid, Low, Strobe, or S.O.S.)
- Intelligent memory function returns to the last used brightness setting for User-Defined Mode
- Internally rechargeable, when equipped with 18650 battery via the included micro-USB port
- Micro-USB port case protects against damage from water, impact, and dust
- Intelligent charging circuit with voltage detection ensures safe charging
- Reverse polarity protection prevents damage caused by improperly inserted batteries
- Included Accessories:
- 1 x Nitecore NL1834 18650 3400 mAh 3.7V Li-Ion Battery
- 1 x Micro-USB Charging Cable
- 1 x NFR40 Red Filter
- 1 x NFG40 Green Filter
- 1 x RSW1 Remote Pressure Switch
- 1 x Choice of Weapon Mount: GM02, GM03 or GM04
- 1 x Nylon Holster
- 1 x Tactical Cigar Ring
- 1 x Stainless Steel Titanium-Plated Pocket Clip
- 1 x Lanyard
- 1 x Spare Tailcap Boot
- 1 x Spare O-Ring
- LED: CREE XP-L HI (V3) LED
- Power Source: 1 x 18650 (Included) OR 2 x CR123A
- IPX Rating: IPX-8 (Waterproof and submersible up to 2 meters)
- Impact Resistance: 1.5 meters
- Brightness Outputs (Using 1 x 18650):
- Turbo - 1000 Lumens - 1 Hour
- High - 300 Lumens - 4 Hours
- Medium - 110 Lumens - 10 Hours 45 Min.
- Low - 50 Lumens - 36 Hours
- Brightness Outputs (Using 2 x CR123A):
- Turbo - 1000 Lumens - 45 Minutes
- High - 300 Lumens - 3 Hours 15 Min.
- Medium - 110 Lumens - 7 Hours 45 Min.
- Low - 50 Lumens - 23 Hours
- Peak Beam Distance: 452 meters
- Peak Beam Intensity: 51,100 cd
- Length - 6.3" (160 mm)
- Head Diameter - 1.57" (40 mm)
- Body Diameter - 1.0" (25.4 mm)
- Weight: 5.04 oz. (143 g)
|Output Modes:||3+ Brightness Levels, SOS, Strobe|
|Compatible Batteries:||1 x 18650, 2 x CR123A, 2 x RCR123A|
|Included Accessories:||Batteries, Gun Mount, Holster, Lanyard, Pocket Clip, Remote Pressure Switch, Spare O-ring(s), Spare Tailcap Boot, Tactical (Cigar) Ring, USB Cable, Green Filter, Red Filter|
|Flashlight Usage:||Search, Tactical|
|Throw Distance (Max):||452m|
|LED:||CREE XP-L HI V3|
|Warranty:||Battery Junction 30-Day Warranty, Nitecore 5 Year Warranty|
|Return Policy:||Battery Junction Return Policy|
|Primary Material:||Anodized Aluminum|
|Product Dimensions:||6.3" (L) x 1.57" (Head Diameter)1" (Body Diameter)|
|Country of Origin:||CN|
Titanium Innovations CR123A (12PK) 1400mAh 3V 3A Lithium Primary (LiMNO2) Button Top Photo Batteries - Box of 12, Shrink-Wrapped in Pairs$13.20(256 Reviews)As Low As: $12.60 Ea.Free Shipping Over $50!
Sunwayman V11R Variable Output Flashlight with Magnetic Control - CREE XM-L2 U2 LED - 570 Lumens - Uses 1 x CR123A/16340$49.95(9 Reviews)Free Shipping Over $50!
- $23.95(41 Reviews)Free Shipping Over $50!
Olight S1 Baton Flashlight with Magnetic Tailcap - CREE XM-L2 CW LED - 500 Lumens - Uses 1 x RCR123A or 1 x CR123A$44.95(125 Reviews)Free Shipping Over $50!