S1 Baton Raw Copper

Get a New Look for Your Olight S1 Baton

The Olight S1 Baton that you loved now comes in two new beautiful finishes: raw copper and rose gold copper. These are special editions, so it must be said that supplies are limited. The light source for the Raw Copper and Rose Gold editions is a CREE XM-L2 LED bulb. These flashlights use either one RCR123A or one CR123A battery as their power source. With three brightness levels, the lumen outputs on the Olight Raw Copper and Rose Gold editions are: 500 lumens/300 lumens on Turbo; 80 lumens on medium; and 8 lumens on low. These flashlights come with two additional modes: a 0.5 moonlight mode and a 10hz strobe mode. The Turbo mode will drop down to 300 lumens after a few minutes; not to worry, though--you will still get a strong amount of light from your S1 Baton.

Crafted from Superior Quality, Lustrous Copper

The burn rates are (CR123A): 1.5 min on 500 lumens, then down to 300 lumens for 90 minutes (Turbo, with a thermal regulation system); 6h for medium mode; 40h for low; and 25 days for the moonlight mode. With the alternate RCR123A battery, it is 1.5 min. on 500 lumens, then it reduces to 300 lumens for 60 minutes (Turbo, with a thermal regulation system); 4h for medium mode; 25h for low; and 15 days on moonlight mode. The Candela rate/peak beam intensity for the Raw Copper and Rose Gold editions is 3,000cd, and the beam/throw distance is 110m. The Olight S1 Baton Raw Copper and Rose Gold are IPX-8 rated at 2m below water and they have an impact resistance rating of 1.5m. It should be noted that the standby current is low, at under 10uA. The Raw Copper version of the S1 Baton is crafted from superior quality, lustrous copper that is designed to weather and to develop a patina in an attractive manner. The Raw Copper and Rose Gold S1 Batons have a unique PMMA TIR lens, which stands for total internal reflection. This is a special lens that lets light filter through it really well and smoothly--at 90%, in fact. The S1 Baton Raw Copper and Rose Gold editions have a flat tailcap, so you can stand them up; they also have a magnet in the tailcap, so you can mount them on a surface while you're working and not have to hold them; this is sure to give you some peace of mind. These Olights also contain reverse polarity protection, so even if you accidentally put your battery in the wrong way, you won't harm either the battery or the flashlight itself.

Be Sure To Pick One of These Gorgeous Lights up while Supplies Last!

The Rose Gold version is PVD-coated; this means that it is copper, coated through a process called physical vapor deposition. In other words, the copper is put into a vacuum chamber and is struck with ions that have positive charges; this process enables the copper to gain a greater density than it would otherwise have. The warranty for the Olight S1 Baton Raw Copper and Rose Gold editions is the Olight five-year warranty. These flashlights come with several very useful accessories, such as a lanyard, a stainless steel pocket clip, one CR123A battery, and a white traffic wand for safety and emergency situations; also included is a user manual. Get a new look for your Olight S1 Baton, so be sure to pick one of these gorgeous lights up while supplies last!

• Run times** Using CR123A Battery:
  • Turbo: 500 lumens / 1.5 min.(90 min.)
  • Medium: 80 lumens / 6h
  • Low: 8 lumens / 40h
  • Moonlight: 0.5 lumens / 25 days
  • Strobe: 10Hz
• Run times** Using RCR123A Battery:
  • Turbo: 500 lumens / 1.5 min.(60 min.)
  • Medium: 80 lumens / 4h
  • Low: 8 lumens / 25h
  • Moonlight: 0.5 lumens / 15 days
  • Strobe: 10Hz
• Available in beautiful, lustrous raw copper or PVD-coated rose gold finishes
• Light source is CREE XM-L2 LED bulb
• Use either one RCR123A or one CR123A as battery source
• Have unique PMMA TIR (total internal reflection) lens
• Crafted from superior quality, lustrous copper designed to weather and patina in an attractive manner; Rose Gold version is PVD-coated copper
• Candela rate/peak beam intensity is 3,000cd
• Two additional brightness modes: a 0.5 moonlight mode and a 10Hz strobe level
• Beam/throw distance is 110m
• IPX-8 rated at 2m below water
• Have impact resistance rating of 1.5m
• Contain reverse polarity protection for batteries
• Have flat tailcaps with magnet in them for mounting purposes
• Warranty is the Olight five-year warranty
• Included accessories are: a lanyard, stainless steel pocket clip, one CR123A battery, and a white traffic wand

• Light source: CREE XM-L2 LED bulb
• Battery source: 1 x CR123A or 1 x RCR123A
• Lens: PMMA TIR lens
• IPX rating: 8
• Impact resistance: 1.5m
• Candela rate/peak beam intensity: 3,000cd
• Beam/throw distance: 110m
• Warranty: Five-year Olight warranty
• Dimensions:
  • Length: 2.4 in.
  • Weight: 2.43 oz. (without batteries)
  • Bezel diameter: 0.83 in.