Olight S10R Baton

Now Rechargeable

Olight has gone ahead and refreshed the S Series line, so now your favorite S10 from Olight features integrated charging technology. The S10R is a very small yet powerful flashlight that has been constructed from hard-anodized aircraft-grade aluminum. Measuring in at just under three inches and weighing 1.5 ounces, the S10R is the perfect EDC light to have when out and about. The S10R features a dual purpose magnetic tail-cap, which will allow you to attach it to any metal surface to be used as a work light. It also attaches securely to the included micro-USB charging dock. A glow-in-the-dark O-ring in the bezel helps you locate the light in the event that you accidentally drop it. If you do happen to drop it on the ground or in a puddle, you are all set because the S10R is impact resistant up to 1.5 meters and is IPX-7 waterproof. An indicator LED will glow red while charging and creen when complete.

Lighting Technology

CREE LED

The S10R is equipped with the latest XM-L2 LED from CREE, which is able to emit a very bright 400 lumens. The multi-function side switch allows you to cycle through the four output modes including strobe. You can access strobe mode by double clicking the side switch when the light is on. If that is too much light, you can get into moonlight mode by pressing and holding the side switch when the light is off. The S10R will cycle from the 5 lumen low mode, to the 85 lumen medium mode, and finally up to the 400 lumen high mode.

Power

Micro-USB Charging Dock

Powering the S10R is the included Li-ion 650mAh RCR123A/16340 battery or you can use a Lithium CR123A battery as backup. You don't have to worry about inserting the batteries improperly as reverse polarity protection will guard you against malfunctioning. The side switch doubles as a battery power indicator, which will glow red when the battery runs low. If you do happen to deplete the battery, use the included micro-USB charging dock that magnetically snaps to the tail of the light to charge your RCR123A. The charging dock also includes USB port so you can charge another device while charging the S10R. Keep in mind, the charge port has to be plugged in to a powered USB port like a wall adapter, computer, or laptop. Plugging the dock into a port on the side of a monitor or another kind of non-powered USB hub will not work.

Features:

• Multi-function side switch with four brightness levels, plus a strobe mode
• Low-profile side switch featuring a battery power indicator, which glows red when battery runs low
• Thermal management safety program provides overheating protection by dropping high output by 50% after 4.5 minutes of constant on
• Glow-in-the-dark O-ring in bezel to help locate flashlight from accidentally dropping it
• Automatically return to your last brightness level with the built in memory function
• Flat tailcap with strong magnet, giving you the ability to use the light as a hands-free worklight
• Reverse polarity protection to prevent improper battery installation
• Toughened ultra-clear mineral glass with anti-scratch coating
• Constructed from aero grade aluminum alloy
• HA III military grade hard-anodized finish
• Impact resistant to 1.5 meters
• Waterproof in accordance with IPX-7 standards
• Included accessories: RCR123A, lanyard, charge-dok, USB cable, and 2 O-rings cable, RCR123A, user manual

Specifications:

• LED: CREE XM-L2
• Runs on: 1x RCR123A or 1x CR123A (RCR123A included)
• Output mode/Runtime:
  • High: 400 lumens / 0.83hrs
  • Mid: 85 lumens / 3.5hrs
  • Low: 5 lumens / 56hrs
  • Moonlight: 0.5 lumen / 168hrs
  • Strobe: 400 lumens / 1.66hrs
• Peak Beam Intensity: 2,700cd
• Max Beam Distance: 104 meters
• Dimensions:
  • Length: 2.9" (73.5mm)
  • Bezel Diameter: 0.91" (23mm)
  • Body Diameter: 0.91" (23mm)
• Weight: 1.52 oz (43g) (excluding batteries)

Charge-Dok Specifications:

• Input: DC 5V
• Output 1: 4.55V 0.5A
• Output 2 (Extended): 5V 2A
• Dimensions: 2.17" x 1.97" x 0.63 (55 x 50 x 16mm)
• Weight: 0.85 oz (24g)