


Multi-Current Universal Smart Charger for 9.6V - 18V NiMH Battery Packs (Tamiya Plug) CH-UN180
- Charger Channels: 1
- Compatible Battery Sizes: Custom / Battery Pack
- Supported Chemistries: Ni-Cd, Ni-MH
Recently viewed
Description
- Universal Fast Smart Charger is designed for charging any NiMH / NiCd Battery Pack from 9.6V - 18V, for 8 to 15 cells pack.
- LED flashing red-green-red before charging (no battery connection) in order to test the IC of the charger if ready to use.
- It is a very smart charger. Just plug it in and wait for the battery to get fully charged. Red LED indicates charging and Green LED means fully charged
- Short circuit protection: No output voltage from the charger if the battery is not connected.
- 120-240V AC input for worldwide use.
- Buit in temperature sensor to double ensure the battery pack from overcharged
- Extra battery temperature sensor wire included for your battery which do not have thermostat build in the battery. You need to DIY to add wire on you battery if necessary.
- UL Listed E308310
- Auto detect battery pack voltage and set up proper charging voltage
- Cut-off power automatically by negative delta V IC when battery pack is fully charge.
- Built in IC protecting battery from over current, short circuit & reverse polarity.
- One temperature sensor outlet ( Female BEC connector) is installed with the charger to double protecting battery from overcharged.
- You must use temperature sensor to charge 12V or higher NiMH battery pack, except water bottle nimh batteries.
- For <12V battery pack, you may recharge battery without sensor. However, putting a temperature sensor on the battery pack is always a good idea
- Weight: .6 Pounds (272g)
- Dimensions: 140mm x 64mm x 38mm (5.5" X 2.5" X 1.5")
Two current levels: 0.9A and 1.8A selectable by a switch for both low (< 2800mAh) and high capacity battery pack (> 2800mAh)
- For battery pack between 900mAh and 2800 mAh, please use the low level switch -- charging rate: 0.9A
- For battery pack over 2800 mAh, please use the high level switch -- charging rate: 1.8A
The smart charger will cut-off power automatically when battery is full. However, Charging time can be estimated as the follow: Time ( Hrs ) = Battery capacity (Ah) / Charging current ( 0.9A or 1.8A )
Accesories included:- One 5' cable with female Tamiya connector and two clips which allow you to connect a battery pack to the smart charger.
- One temperature sensor (70°C thermister ) is included for battery pack which don't have thermostat protection. It must be connect between battery charger and the battery pack before charging to protect battery from overcharging.
- It will cut-off power if battery temperature is over 70°C.
Item Details
| Brand | Powerizer |
| SKU | POWERIZER-CH-UN180 |
| Manufacturer Part Number | CH-UN180 |
| Charger Channels | 1 |
| Compatible Battery Sizes | Custom / Battery Pack |
| Supported Chemistries | Ni-Cd, Ni-MH |
Specifications
| Charge Rate | 1800 |
| Charger Channels | 1 |
| Compatible Battery Sizes | Custom / Battery Pack |
Unit Dimensions
| Length | 5.5 in (140 mm) |
| Width | 2.5 in (64 mm) |
| Height | 1.5 in (38 mm) |
| Weight | 9.595 oz (272 g) |
Packaging/Shipping Dimensions
| Shipping Weight | 0.97 lb |
Additional Details
| Warranty | Battery Junction Warranty |
| Return Policy | Return Policy |
Bright Buys
- Reliable lithium chemistry with a 10 year shelf life
- Regarded as one of the highest quality CR123A batteries on the market
- Used in LED flashlights, alarm systems, ranger finders and more
- Cells are lightweight, durable and ideal for long term storage
- Jacket style may vary
- Ideal for low-drain applications that require a primary battery to provide constant power
- 10-year shelf life - stock up for emergencies!
- The best choice for consistent power, great in low-drain devices like remotes
- Safe and reliable - capable of performing in high or low temperatures
- 11-in-1 card sized tool fits in your wallet or on a keychain!
- Packed with handy tools including a screwdriver & 7 wrench settings
- Serrated saw and straight-edge knife for quick cutting jobs
- Can + bottle openers for campsite meals or end-of-shift relaxation
- Four-channels saves time by charging multiple batteries at once.
- Capable of charging multiple chemistries by automatic battery detection.
- LCD display reveals the charging progress, battery type, voltage, and charging current.
- Automatic power-off function cuts off the current when charging is complete.
- Extremely compact and powerful EDC
- Max output of 3,000 lumens with a max throw of 229 meters
- Dual fuel and available with extender for use with a 26650
- Equipped with 4 x CREE XPG3 LEDs for maximum illumination
- 225mAh capacity drives long runtimes for watches and electronics
- CR2032 coin cells packed with 3V of power
- Convenient 6-piece retail card provides backup batteries
- Easily replaceable primary lithium cells
- Top recommended battery for Apple AirTags
- 3,000 lumens and a 250-meter throw - fierce illumination to light up your backyard
- Multiple output modes are accessible via easy side switch operation
- Strobe, SOS, and beacon modes offer distinct signaling capability
- High-capacity battery supports the light with a maximum 227-hour runtime
- Upgraded to output up to 3,100 lumens with a 1,000ft throw for optimal spotting!
- Offers fast, direct USB-C recharging from outlets, power banks, and more
- Ultra-slim design provides an easy-to-hold, simple EDC lighting solution
- OLED screen monitors performance, including charge level, brightness & beyond
- Pre-shrink wrapped Panasonic CR123A batteries great for OEM use & more
- 1550mAh high capacity keeps lights, alarms & more running longer
- Lithium cells with stable 3V output and strong discharge performance
- Storage life of up to 10 years ensures backups remain ready for use






