Nitecore Multitask MT06 LED Penlight - CREE XQ-E R2 LED - 165 Lumens - Uses 2 x AAAs

Nitecore MT06 LED Penlight - 165 Lumens - CREE XQ-E (R2) LED - Runs on 2x AAA Batteries

Nitecore MT06 LED Penlight

Highly Portable

Introducing the MT06 LED Penlight from Nitecore, a highly portable, easy to use, multi-purpose LED penlight. Measuring in at 5.4" with a low profile pen-shaped design, the MT06 fits perfectly in your shirt pocket or just about anywhere, especially with the included pocket clip. The MT06 is the perfect tool to have if your are in the medical field, law enforcement, or working on the car. The tail switch allows for one-handed operation, putting all the attention on your patient or task at hand. Constructed from aero-grade aluminum alloy with a HA III military grade hard-anodized finish, the MT06 can stand up to everyday use, while being tough and durable.

Lighting Technology

CREE LED

Equipped with CREE's XQ-E (R2) LED, the MT06 outputs a very bright 165 lumens, while in High mode. With the light turned off, pressing the switch until a click is heard turns the MT06 on in low mode. The MT06 will emit 32 lumens in Low mode for up to 5.25 hours. Pressing the switch again turns the light off. With the light turned on, pressing the MT06 within 2 seconds or simply pressing the switch halfway switches the light between high mode and low mode.

Power

2x AAA Batteries

Powering the MT06 are two AAA batteries, which can be found almost anywhere these days, especially here at BatteryJunction. You can use either primary Alkaline batteries or go the rechargeable route using NiMh rechargeable batteries. You won't have to worry about getting the batteries wet or damaging your new light, as the MT06 is IPX-8 waterproof and withstand being submerged in 2 meters of water for up to 30 minutes.Features:

• Reverse rear switch design for one-handed operations
• High efficiency constant current circuitry provides unwavering and dependable output
• Stainless steel clip included
• Toughened ultra-clear mineral glass with anti-scratch coating
• Constructed from aero grade aluminum alloy
• HA III military grade hard-anodized finish
• Impact resistant to 1.5 meters
• Waterproof in accordance with IPX-8 standards
• Included Accessories: spare O-ring

Specifications:

• LED: CREE XQ-E (R2)
• Runs on: 2x AAA Alkaline/NiMh (Batteries NOT included)
• Output mode/Runtime:
  • High: 165 lumens / 0.75hrs
  • Low: 32 lumens / 5.25hrs
• Peak Beam Intensity: 2120cd
• Max Beam Distance: 92 meters
• Dimensions:
  • Length: 5.4" (128mm)
  • Bezel Diameter: 0.55" (14mm)
  • Body Diameter: 0.55" (14mm)
• Weight: 0.78 oz (22g) (excluding batteries)