ARE YOU A PRO? Join for FREE!Our L.E.D. Combo Upgrade ll replaces the incandescent bulb of a AA Mini Maglite® with the bright white beam of L.E.D., and the two-handed on/off twist with a simple push-button tail cap switch. Your AA Mini Maglite® will not only be easier and more convenient to operate, it will have higher quality, more powerful, and more efficient illumination. The L.E.D. bulb lasts a virtual lifetime and uses less power, giving you five times the battery life. The L.E.D. Upgrade Combo ll is also fully focusable, so you can adjust its beam from wide flood light to narrow focus, according to the task at hand. It's an easy, economical, and ecologically responsible way to improve the quality and convenient functionality of your AA flashlight.
| Brand | NiteIze |
| SKU | NITEIZE-LUC2-07 |
| Manufacturer Part Number | LUC2-07 |
| UPC | 094664014978 |
| Color | Silver |
| Length | 1.62 in (41 mm) |
| Secondary Material | Glass |
| Batteries Included? | No |
| Length | 1.62 in (41 mm) |
| Width | 0.88 in (22 mm) |
| Height | 0.88 in (22 mm) |
| Weight | 0.35 oz (10 g) |
| Shipping Weight | 0.05 lb |
| Packaging | Retail Packaging |
| Warranty |
Nite Ize 2 Year Limited Warranty Battery Junction Warranty |
| Return Policy | Return Policy |
Overall rating: 3.7142856 / 5 from 7 reviews.
Review topics: ["works","bulb","mag","batteries"].
"I bought this just for the push button end cap to replace an earlier version that quit. Just like the old one, this one's spring is too short and had to be stretched to make contact with the battery. Once done it works just fine."
"This is how the Mini Maglite should have looked from the begining . . . . Nice and Bright !"
"I don't particularly like the factory LED's that Mag Instrument installs at the factory: while they are much brighter than the Nite Ize LED, the Mag Instrument LED's have a short battery life that defeats the whole point of having an LED light Nite Ize is the right combination of Lumens and Battery Life and for me is a better choice: it essentially doubles the light intensity and increases the battery life by a factor of 5 over the Bi-Pin bulbs."
"The addition of this item to my Mag-Lite AA has transformed it into a totally new piece of equipment. Previously the only with to turn the light on/off was a cumbersome process of having to rotate the front portion of the light. After incorporating this item it's simply a push of a button. Additionally the LED bulb provides a clearer, brighter, white light increasing it's illumination capability. I should have done this mod many years ago. Thanks."
"I switched two small Mag-Light flashlights with these kits and they both work pretty well. Maybe I'm just being picky, but if you screw the lense cap on tight the flashlight doesn't work. So you must leave it s bit loose for it to function. That being said, it does work very well and is brighter than the bulb. It was worth the price and I do recommend it as t should extend battery life considerably. There is also no more annoying broken bulbs. Replacing a bulb nearly every time I dropped the flashlight kept them in the drawer mosre than in my pocket. I was constantly ordering bulbs."
"I bought two or three of these units about two years ago to upgrade various mini-mags I use. One is for work around the house. This unit works but you do lose the ability to focus the beam at a distance. Just under one full turn of the head and it comes loose or off. The bulb unit is larger or taller so this is the reason you lose the ability for 1-2 full turns of the head down onto the flashlight body. I have also noticed something strange. Put the bulb pins in one way the and the light won't turn on. Pull the bulb out, rotate it 180 degrees, plug it back in and viola, it works again! I don't remember ever having this issue when replacing OEM bulbs so I'm not sure what's different here. The switch has held up well and I like having two means of turning the light on. With both in the off position I don't have to worry about the flashlight accidentally turning on when rolling around in a soft or hard toolbox and running the batteries out. After years of use some of the heads can become loose and turn very easily even if replacing the rubber gasket. So having two power switches is a good thing in my eyes. Finally, for some reason, I've had one bulb just die. This is one of my first LEDs to die and I am surprised but at least it lasted about two years and that is better than some of the OEM bulbs that I punished and burned out in about 6 months. I would recommend this to a friend but with caution as I don't think this will fit everyone's desired uses."
"LED replacement is good for an old light. Instructions for lamp upgrade to led are poor. Push button switch is not worth getting as front must be rotated to correct spot not too loose or tight. I tried it, tossed push button."
Your cart is currently empty.
Start Shopping
